Water sensor

Hardware settings, adjustments and fixes and other hardware discussion. This includes the "doHICky" Laser Power measurement system by Russ.
Post Reply
Clive Griffiths
Posts: 3
Joined: Sun Dec 04, 2016 12:31 pm
Location: South Wales, UK

Water sensor

Post by Clive Griffiths » Tue Dec 06, 2016 7:16 am

Can anyone with the SH-G350 Blue & white help me. My water sensor failed a few weeks ago and I threw it away. I now need a photo of it to get a replacement. A photo of the wiring at controller end would be usefull to. Any help greatly appreciated.
Ruida controlled SH-G350 and a K40

User avatar
Jay Wrightson
Posts: 85
Joined: Thu Jul 14, 2016 8:21 am
Location: UK, Belfast

Re: Water sensor

Post by Jay Wrightson » Tue Dec 06, 2016 7:23 am

-Jay

-------------------------------------------
50W Blue and White Chinese Laser, 500 x 300, TL
RdWorks V8.01.18
N Ireland, UK

Clive Griffiths
Posts: 3
Joined: Sun Dec 04, 2016 12:31 pm
Location: South Wales, UK

Re: Water sensor

Post by Clive Griffiths » Tue Dec 06, 2016 12:47 pm

Thanks for the help Jay, but mines a different type.
Ruida controlled SH-G350 and a K40

User avatar
Stephen Eaton
Posts: 29
Joined: Fri Nov 25, 2016 7:29 am
Location: Bunbury, Western Australia
Contact:

Re: Water sensor

Post by Stephen Eaton » Tue Dec 06, 2016 7:56 pm

http://www.banggood.com/Magnetic-Self-C ... 909622.htm will do the trick, just might need adapter on both ends.
Stephen...

eBay 80w (70w) Chinese laser, 700x500mm, T.Right Home
RD Works V 8.01.19

Dustin Hawkinson
Posts: 158
Joined: Sat Nov 19, 2016 6:55 pm
Location: Phoenix, AZ USA

Re: Water sensor

Post by Dustin Hawkinson » Wed Dec 07, 2016 3:24 pm

Stephen's link doesn't work for me, but here's one I found on ebay. I don't know where the wiring connects to the controller, but if you need to you can cut the wire ends off your dead one and wire nut them together so you can continue to work until the new one comes. As long as you understand the risk you take bypassing the safety switch of course.

http://www.ebay.com/itm/111939175201?_t ... EBIDX%3AIT

Edit: I just checked your location and added it to your profile for you. Here's one on ebay.co.uk:

http://www.ebay.co.uk/itm/AC-220V-3A-22 ... SwRgJXieEX
40W (ebay 50W blue wonder), 300mm x 500m, TL
Windows10 RDW 8.01.19
(The member formerly known as astral)
-Dustin

User avatar
Stephen Eaton
Posts: 29
Joined: Fri Nov 25, 2016 7:29 am
Location: Bunbury, Western Australia
Contact:

Re: Water sensor

Post by Stephen Eaton » Fri Dec 09, 2016 2:09 am

Hmm just checked the link I gave above and 404 error

Anyway here it is again and I checked it and it works

http://www.banggood.com/Magnetic-Self-C ... mds=search
Stephen...

eBay 80w (70w) Chinese laser, 700x500mm, T.Right Home
RD Works V 8.01.19

User avatar
Gene Uselman
Posts: 1172
Joined: Thu Jul 07, 2016 3:18 pm
Location: Suburban Minneapolis, Minnesota, US

Re: Water sensor

Post by Gene Uselman » Fri Dec 09, 2016 7:23 am

I actually order a lot of stuff from Banggood, always cheap, usually better quality than I expect, as long as you have time to wait. Gene
Gene- 130W 1300x900 China Laser with 2" FL lens
V8.01.19 RDWorks on Win 7 pro
500mm Z, blade table - home is upper right.

Bodor BCL0605MU w/100w Reci- gone but [fondly?] remembered :D
Semi-Retired Signshop guy [not good at retiring yet]
Vectric Aspire software- FlexiSignPro- vector/bitmap
I have not failed. I've just found 10,000 ways that won't work. Thomas Edison

User avatar
Stephen Eaton
Posts: 29
Joined: Fri Nov 25, 2016 7:29 am
Location: Bunbury, Western Australia
Contact:

Re: Water sensor

Post by Stephen Eaton » Mon Dec 12, 2016 2:50 am

@gene ditto
Stephen...

eBay 80w (70w) Chinese laser, 700x500mm, T.Right Home
RD Works V 8.01.19

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest