Ethernet Connection failure

A place for users to ask questions and search for already asked questions. "BE NICE" and helpful!

PM GeneMpls with Questions about this FAQ PM - Top Right Side by your name.
Stuart Cook
Posts: 8
Joined: Thu Dec 29, 2016 7:34 am
Location: Palatine, IL

Ethernet Connection failure

Postby Stuart Cook » Mon Jan 09, 2017 8:27 am

Just set up my machine and USB connects no problem, Ethernet is giving me some trouble. I have tried entering ISP data in the LCD and then the same when I get port form software and I am getting Connection Failure. I have turned off Windows Defender and still no luck. I admit to being a laser newbie (although I have built two cnc routers) and am not a networking expert. I am running version 8.01.21 of RDWorks and Windows 10. Any help would be greatly appreciated.

Thanks,
Stuart Cook
26" x 14" 60 watt Chinese laser, TL
RDWorks V8 , Corel Draw X8
Windows 10
Home Built 24" x 36" CNC Router

Tikhomirov Sergey
Posts: 16
Joined: Thu Nov 24, 2016 8:41 am
Location: Russia
Contact:

Re: Ethernet Connection failure

Postby Tikhomirov Sergey » Mon Jan 09, 2017 11:19 am

Specify a valid port number USB instead of AUTO mode
Machine KaitianLaser C90 used with 2006 and restored me.
Power 80w(EFR-F2(80-95w)), Laser Bed Size 1000x620mm Laser head Home Position TR
RDC6442G RDWorks v8.01.21 on W7x32 Ult
Sergey

Chris Medcalf
Posts: 21
Joined: Wed Jul 13, 2016 11:23 am
Location: Yorkshire

Re: Ethernet Connection failure

Postby Chris Medcalf » Fri Jan 13, 2017 2:38 am

More details of the connections would help to diagnose this. Is your machine wired to a router or direct to the laptop, for instance.
Chris
KH7050B 60W

Stuart Cook
Posts: 8
Joined: Thu Dec 29, 2016 7:34 am
Location: Palatine, IL

Re: Ethernet Connection failure

Postby Stuart Cook » Sun Jan 15, 2017 2:06 pm

Just to follow up with the solution. I am connected directly to my computer with the supplied cable and am able to connect via ethernet with the IP address 192.168.1.200.

Thanks to all who helped!
Stuart Cook
26" x 14" 60 watt Chinese laser, TL
RDWorks V8 , Corel Draw X8
Windows 10
Home Built 24" x 36" CNC Router


Return to “User Questions and Help”

Who is online

Users browsing this forum: No registered users and 1 guest