Machine Settings

RESCUE Files for various sized and makes of machines.
Post Reply
User avatar
Keith Sherwin
Site Admin
Posts: 1483
Joined: Fri Jun 24, 2016 3:44 pm
Location: Heart of Canada
Country: Canada
Nickname: Keith
Laser Machine Make or Type: POS China
Laser Power: 80
Laser Bed Size: 400 x 600
Home Position: TL
RDWorks Version: V8.01.23
Accessories: Hot dog roller, doHICkey Power Meter, Multi-Lens, High power exhaust, Interior filter soon.
Windows Version: W7 Pro

Machine Settings

Post by Keith Sherwin » Thu Sep 22, 2016 2:06 am

These files are Backup files for machines that are VERY SIMILAR TO the one Russ has.
Only use these if you have lost your own backup files.
The Vendor goes in the vendor Settings click on menu [File] -> [Vendor settings] and enter rd8888
then with computer connected to the laser, and both turned on, Click on "READ",

To make a backup of a good setting, do the stuff in red, otherwise skip to the black text.
this is where you would then click on "Save" and choose a name like "Original Vendor File", if you are making a backup.


If you are replacing a really bad Vendor setting, then click on "Open" and enter the file name, then click on "WRITE". Turn the laser off, then back on & it should be reset to the new parameters.
Vendor file is *.RDVSet

For the "USER" settings, Click USER TAB-right hand side, Click on Read,
To make a backup of a good setting, do the stuff in red above, otherwise skip to the black text.
then "Open" to Select the replacement file, then "Write" to put it in the machine. Restart laser.
User file is *.RDUSet

Following that, you may need to do the following to get correct scaling. Please read this.
http://rdworkslab.com/viewtopic.php?f=30&t=282
Attachments
User Vendor Settings.zip
Only use if you don't have a good backup.
(827 Bytes) Downloaded 167 times


Last bumped by Keith Sherwin on Thu Sep 22, 2016 2:06 am.
:idea: Started this forum Lead in creation of the RDWorksLab English Manual.
Cheers,
Keith

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest