Many problems with the axes ?

A place for users to ask questions and search for already asked questions. "BE NICE" and helpful!
Post Reply
Sascha Pamperin
Posts: 3
Joined: Fri May 06, 2022 11:06 am
Location: DUISBURG
Country: Deutschland
Laser Machine Make or Type: vevor
Laser Power: 100
Laser Bed Size: 60x90
Home Position: BR
Control Software: RDWORKS
RDWorks Version: 8
Ruida Controller: Other
Windows Version: 9

Many problems with the axes ?

Post by Sascha Pamperin »

Hello, I bought a Vevor 100w Laser Red Black a few days ago and unfortunately something stupid happened to me.
I factory reset the laser without saving anything

it has a working area of ​​900x600 and no longer knows any keystrokes he drives into the housing on X & Y and further if he could.
I have already tried to import some settings from the posts here, unfortunately without good success

Engraving also causes problems - circles are sometimes not round or offset

It is a mystery to me what I have to set where so that it works correctly
You do not have the required permissions to view the files attached to this post.
Sascha Pamperin
Posts: 3
Joined: Fri May 06, 2022 11:06 am
Location: DUISBURG
Country: Deutschland
Laser Machine Make or Type: vevor
Laser Power: 100
Laser Bed Size: 60x90
Home Position: BR
Control Software: RDWORKS
RDWorks Version: 8
Ruida Controller: Other
Windows Version: 9

Re: Many problems with the axes ?

Post by Sascha Pamperin »

Hello again,

Somehow I was able to get him to stay in his work area and also laser circles and squares.

but I have a strong misalignment on several dates...
look at the photo what I expected
ab56d003-da0d-41fa-8a5a-620d049a2c8e.jpg

and what he did
f10e2ac8-8089-47cd-84f4-2bcf2b935fa6.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
Gene Uselman
Posts: 2038
Joined: Thu Jul 07, 2016 3:18 pm
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: AKL1318-2
Laser Power: 130W & 80W Reci
Laser Bed Size: 51 x 71
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
Ruida Controller: RDC6445
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, Prusa i3 MK3S and Mini Prusa printers.
Windows Version: Win 10 Pro

Re: Many problems with the axes ?

Post by Gene Uselman »

Losing the Vendor files is a common problem and can be hard to fix. There are many configurations of similar machines so I would look for files from a similar sized machine [or if you are lucky there may be several]. Try all that you can find and make notes as to which features work on which files. The files can be read by a program called Notepad++ and sometimes you can figure out what different setting actually do.
I would guess you contacted whoever you purchased from to ask for the files? Vevor seems to be a large company- perhaps they can help. If any member has a similar machine perhaps post your Vendor files...
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.

BT48 Alpha Shopbot and 1300x1800 130W Laser

The days that I keep my gratitude higher than
my expectations, Well, I have really good days.

Ray Wylie Hubbard
Post Reply

Return to “User Questions and Help”