The server went down sometime Aug 3. When I contacted the Web Host they indicated the issue was mine but restored the site using a 28 Jul backup.
Sometime late yesterday the server went down again and the Webhost decided it was their problem and did work on the Server. Evidently that failed and they restored a backup they had from some time on 3 Aug. It looks like the data has been restored.
Based upon the recommendation of one of our moderators I will be backing up the site daily now to guard against this issue in the future. i don't see my posts from 3 Aug announcing the original issue...that is why I believe they restore to sometime immediately before the site went down.
I am supposing they did some upgrade that failed and they were slow to recognize their error AND that is why they had a backup that day (they normally backup on Sat night) - I could be wrong but since I have to guess - that's my guess.
Server
-
- Posts: 1938
- Joined: Sun Nov 27, 2016 5:16 pm
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Accessories: roller rotary attachment
- Windows Version: Win 10
Server
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
- Posts: 388
- Joined: Fri Aug 11, 2017 1:08 am
- Location: Folsom, California
- Country: United States
- Laser Machine Make or Type: Kehui
- Laser Power: 50W
- Laser Bed Size: 500mmx300mm
- Home Position: TL
- RDWorks Version: 8.01.24
- Ruida Controller: RDC6442
- Accessories: Spray bottle with water (for small fires)
Fire extinguisher (for big fires) - Windows Version: Win10 Enterprise
Re: Server
Pete,
Thanks for all that you do (especially behind-the-scenes stuff we don't even know about) to keep this forum running!
I know there are other moderators out there, quietly helping us out - thanks to them, too!
-Jeff
Thanks for all that you do (especially behind-the-scenes stuff we don't even know about) to keep this forum running!
I know there are other moderators out there, quietly helping us out - thanks to them, too!
-Jeff
-
- Posts: 1938
- Joined: Sun Nov 27, 2016 5:16 pm
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Accessories: roller rotary attachment
- Windows Version: Win 10
Re: Server
Thank you Jeffery - I always appreciate feedback - particularly when it is nice.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
- Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019 2:27 am
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Accessories: Modded and still Modding some more.
- Windows Version: 10
Re: Server
Nice to be back with the content restored in the main.
Initial denial is standard practice with most hosts I have dealt with in the past because their gear is perfect and you lowly users are to blame - Always
Seems very likely they had a hard drive failure or it was starting to fail in this server. As they had a recent backup available and they caused this issue ask them if they can run a daily backup of the site to save your time and effort? It is fairly normal for Hosts to offer this service for a cost but in this case might be worth asking at least for a period of time as a belts and braces backup.
Initial denial is standard practice with most hosts I have dealt with in the past because their gear is perfect and you lowly users are to blame - Always

Seems very likely they had a hard drive failure or it was starting to fail in this server. As they had a recent backup available and they caused this issue ask them if they can run a daily backup of the site to save your time and effort? It is fairly normal for Hosts to offer this service for a cost but in this case might be worth asking at least for a period of time as a belts and braces backup.
-
- Posts: 30
- Joined: Sat Jun 29, 2019 12:12 am
- Location: Port Orchard, WA
- Country: United States
- Laser Machine Make or Type: Laguna PL12/20
- Laser Power: 40w
- Laser Bed Size: 12" x 20"
- Home Position: TL
- RDWorks Version: 8.01.26
- Windows Version: Windows 10
Re: Server
Some forum software offer an auto backup of the database via a cron job. I don't remember if PHPBB has that option or not as I haven't used it for a while. But, backups are important. Cpanel (if you are on it) may have an option, too.
-
- Posts: 1938
- Joined: Sun Nov 27, 2016 5:16 pm
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Accessories: roller rotary attachment
- Windows Version: Win 10
Re: Server
Thanks Steve
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
- Larry Powell
- Posts: 14
- Joined: Sat Mar 03, 2018 6:29 am
- Location: Houston, Texas
- Country: United States
- Nickname: LPowell
- Laser Machine Make or Type: Tek Genius
- Laser Power: 60W
- Laser Bed Size: 28" x 20"
- Home Position: TR
- RDWorks Version: V8.01.26
- Windows Version: 10
Re: Server
Pete,
I just noticed that there is no longer any content to be seen in the Donor and Super Donor pages. Was this information lost somewhere along the way? I might be wrong, but I'm thinking it was made available after the deletion in March, wasn't it?
Thanks.
I just noticed that there is no longer any content to be seen in the Donor and Super Donor pages. Was this information lost somewhere along the way? I might be wrong, but I'm thinking it was made available after the deletion in March, wasn't it?

Larry Powell
-
- Posts: 1938
- Joined: Sun Nov 27, 2016 5:16 pm
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Accessories: roller rotary attachment
- Windows Version: Win 10
Re: Server
I think the only things that was in those sections was a copy of the manual which is now located in the general forum for any who would like to use it.Larry Powell wrote: ↑Tue Oct 08, 2019 8:39 pm Pete,
I just noticed that there is no longer any content to be seen in the Donor and Super Donor pages. Was this information lost somewhere along the way? I might be wrong, but I'm thinking it was made available after the deletion in March, wasn't it? :?: Thanks.
Is there something you remember specifically?
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
- Larry Powell
- Posts: 14
- Joined: Sat Mar 03, 2018 6:29 am
- Location: Houston, Texas
- Country: United States
- Nickname: LPowell
- Laser Machine Make or Type: Tek Genius
- Laser Power: 60W
- Laser Bed Size: 28" x 20"
- Home Position: TR
- RDWorks Version: V8.01.26
- Windows Version: 10
Re: Server
Pete,
I remember plans for a rotary fixture. I had downloaded them on my laptop which is now with a dead harddrive. Seems like Gene may have sent them to me, but I haven't been able to find the email. Just curious more than anything really. I have a rotary that I bought with my fiber laser that might work with my new CO2. I'm going to take a shot at it once I've received the new laser. Thanks for the response, Sir.
I remember plans for a rotary fixture. I had downloaded them on my laptop which is now with a dead harddrive. Seems like Gene may have sent them to me, but I haven't been able to find the email. Just curious more than anything really. I have a rotary that I bought with my fiber laser that might work with my new CO2. I'm going to take a shot at it once I've received the new laser. Thanks for the response, Sir.
Larry Powell
- Gene Uselman
- Posts: 2144
- Joined: Thu Jul 07, 2016 3:18 pm
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: AKL1318-2
- Laser Power: 130W & 80W Reci
- Laser Bed Size: 51 x 71
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- Ruida Controller: RDC6445
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, Prusa i3 MK3S and Mini Prusa printers.
- Windows Version: Win 10 Pro
Re: Server
Larry- it was me you got the plans from, let me know if you decide to look at this again. We are discussing ways to release the plans to the public for a small contribution to keep the forum going in the future. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
BT48 Alpha Shopbot and 1300x1800 130W Laser
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard
Please consider making a donation to maintain the RDWORKSLAB Forum.
BT48 Alpha Shopbot and 1300x1800 130W Laser
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard